Two part resin and mould for a permanent waterproof bore joint.
Product Information
Shipping & Returns
You might also want to check out these products.
equityCylindrical roller bearing NU 205
High radial capacity, axially free outer ring for thermal growth.
A$46.50
equityDeep groove ball bearing 6203
Rubber sealed both sides, C3 clearance. Workhorse of small pump and fan motors.
A$8.40
equitySingle row angular contact 7205
40° contact angle, universally matchable in pairs for spindle work.
A$58.00
equityRun capacitor 450V × 2.5 mfd
Single fast-on 6.3 mm terminals, high resistance to shock and vibration.
A$7.40
equityDeep groove ball bearing 6304
Sealed medium series for grinder, saw bench and general industrial motors.
A$12.80
equityRun capacitor 450V × 25 mfd twin cable
Twin flying leads for retrofits where fast-on tabs will not reach.
A$18.60
equityDouble row angular contact 3204
Takes combined radial and axial load in pool and irrigation pump ends.
A$34.90
equityRun capacitor 450V × 1 mfd
Plastic cylinder, 8 mm stud mount, nut and washer supplied.
A$6.90
equityDeep groove ball bearing 6205
Steel shielded, greased for life. Suits blower and compressor drive ends.
A$11.20
equityRun capacitor 450V × 35 mfd twin cable
Heavy duty run can for A/C condenser fans and larger pumps.
A$21.80
equityCompression joiner 35 mm²
Straight through butt joiner, tinned copper, hex crimp both ends.
A$6.40
equityBimetal thermostat 60 °C N/C
Snap disc thermostat for enclosure fans and heater interlocks.
A$8.90